Ultra-low powder falling insulating glass desiccant

The gases used for drying in industrial production include air, hydrogen, oxygen, nitrogen, argon, etc. Two adsorption dryers are connected in parallel, one is working, and the other can be regenerated at the same time. Work and regenerate alternately to ensure continuous operation of the equipment. The dryer works at 8-12°C and is regenerated by heating to 350°C. The regeneration temperatures of molecular sieves of different specifications are slightly different. Molecular sieves have good catalytic effects on certain organic gas phase reactions. Among all the raw materials that make up the insulating glass, the performance of the sealant and Desiccant has the greatest impact on the service life of the insulating glass product; the desiccant ensures that all water vapor sealed inside the insulating glass will be adsorbed cleanly, and the adsorption will increase over time. The water vapor entering the inside of the insulating glass is the core part to ensure the low dew point life of the insulating glass. It must have super deep adsorption capacity, ultra-low nitrogen adsorption capacity, reasonable acidity and alkalinity, and ultra-low The degree of powder falling. Storage environment: temperature 5-25 degrees, humidity below 70%; no light or radiation, etc.; sealed and kept away from direct contact with air; storage period is 10 years (ideally).

Our main products are: Insulating Glass Desiccant, Molecular Sieve, Desiccant, Packaging Desiccant, Mineral Desiccant, Hollow Glass Molecular Sieve.